Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for the CAN bus. It's discreet, doesn't use key fobs or LED indicators and is hidden within the vehicle's wiring.
It also allows users to disable the system temporarily by using Transport Mode to use it when they are renting out their vehicle. This guide will walk you through the installation of a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against key cloning, hacking and relay attacks. The system is linked directly to the ECU of your vehicle and protected by a PIN code that you choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods. It isn't able to be disabled with circuit cuts.
The system is easy to use, but professional installation is advised to ensure a perfect connection to the ECU of your vehicle. A certified installer from Thatcham can assist in the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complete the protection package for your vehicle.
To avoid the accidental deployment of airbags or short circuits, the installer must first disconnect your battery. When auto ghost immobiliser is disconnected, the installer may start working safely. Hand tools are the most basic to be used to ensure precise connections. A multimeter is a great tool to test electrical values. Cable tie and insulation tape are vital to secure connections and keep wiring neat. Lastly, the user manual provides specific guidance specifically tailored to your Ghost Immobiliser model.
During the installation, it is crucial to select the right grounding location that is free of paint and debris. Installers should also make sure that the immobiliser's wires CAN H & CAN L are connected to the appropriate ECU ports. The wires can be plugged in or soldered depending on the model. A quality connector is recommended to ensure a long-lasting and secure connection.
After the installation is completed Once the installation is completed, the customer can enable Transport Mode. This permits mechanics or valet parking to access the vehicle without knowing the pin code. The customer has to press the service icon on the dashboard five times within 2 seconds. After this is done the system will verify with 5 signal indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's an excellent option for those who regularly rents out their cars through platforms such as Turo. Having an immobiliser can also reduce insurance premiums, since it reduces the likelihood of theft.
Getting Started
If you are looking for a solution to protect your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. It will stop your car from being started even when a criminal steals or copies the key. This is due to its sophisticated technology that is designed to prevent the engine from starting without the correct PIN code is entered.
The device connects to the vehicle's bus network CAN which allows direct communication with the ECU. It uses the buttons on your dashboard and steering wheel to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your car. This is the most secure way to protect your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing a Ghost immobiliser is easy, but you must follow the instructions to avoid electrical problems and malfunctions in the system. First, you must locate a 12V power supply and a good grounding on the car's chassis. Then, you can begin connecting the wires to the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a secure connection. Also, make sure to protect the connections by insulating them by using heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
Once the wires have been connected, you are able to connect the battery and start the engine to determine whether the immobiliser works. After you've verified that everything is working properly and you are satisfied, you can place the immobiliser in a secure place inside the vehicle. Make sure to hide it properly to stop any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it complies with the highest standards of security and is a great deterrent to car thieves. It is a superior defense against key cloning, hacking, and relay attacks, and it cannot be disabled without knowing the code. The device is easy to use, and it can be set to a service valet setting so that your vehicle won't be activated if you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to the CAN bus. The Ghost Immobiliser will not interfere with the factory settings of your car unlike other aftermarket systems which require the removal of circuit elements.
It's also undetectable to thieves using diagnostic scanning devices. The system does not send or receive radio frequency signals and instead uses CAN data to communication with your ECU. It doesn't require any modifications to your existing key fobs.
To use the Ghost Immobiliser, simply switch on the ignition in your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. Now you can begin driving your car in a safe manner.
Once installed, the Ghost Immobiliser protects your car against key cloning or hacking while also protecting its value. If you ever need to hand over your vehicle to a valet or service provider, the Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll require a continuous power source (12V) in addition to a grounding source to complete the installation of the Ghost immobiliser. Make sure that both are well-insulated and safe to touch. It's also recommended to use cable ties to bundle and secure the wires, as this will decrease the chance of tampering by potential thieves. Be sure to double-check the position of these points to avoid making mistakes, and mark them with an adhesive or label. It's recommended to inspect all connections for signs wear and tear. Loose connections can lead to system malfunctions, so be sure they're securely fixed and well-insulated. Make sure to test your Ghost Immobiliser after the installation is completed. This will ensure that the unit functions correctly and that all connections and insulation are safe. If there are any issues, you must be sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that integrates seamlessly into your car's ECU to block unauthorised engine start. Its innovative technology safeguards your vehicle against hacking and key cloning as well as other methods commonly employed by thieves to steal vehicles. The Ghost is a perfect complement to existing alarm and tracking systems to provide the most effective protection for your vehicle. The Ghost's unparalleled features and secluded design make it a popular choice for car lovers and security-conscious drivers alike.
It is crucial to follow the procedures for installation to ensure the proper integration of Ghost Immobiliser. The best place to start is to consult the wiring diagram for your vehicle, which will serve as a roadmap for locating and connecting the required wires. The next step is to identify the power source as well as grounding points. Once you've located them, you'll be required to mark the points to make them easy to locate when installing. It's important to use high-quality materials and tools. Basic hand tools can help to make precise connections, while a multimeter will confirm electrical values and guarantee security. Cable tie and insulation tape will ensure that all connections are tidy. Finally, a user manual will provide specific guidance tailored to your Ghost model.
Before proceeding with the installation, it's important to test the system by entering the PIN code and starting the vehicle. This test will verify that the immobiliser works in the way it was intended, preventing unauthorized vehicle starts. This step should be done frequently as part of your regular inspections of your vehicle to ensure the system is always working correctly.
After the installation is completed After the installation is completed, you are able to drive your vehicle with confidence. The Ghost will protect your vehicle from potential car thieves. It will ensure that no one will take your car away without having the correct PIN code. The Ghost can also be linked with a Thatcham-approved tracker to detect any attempt at tampering or theft, allowing you to locate your vehicle if it is stolen.
The Ghost is compatible with a range of vehicles, including those made by all major manufacturers. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, which guarantees we follow strict standards for the installation of our products. This ensures customers as well as insurance companies and law enforcement agencies that all installations are performed safely and properly.