How to Install a Ghost Immobiliser
A ghost immobiliser is a great deterrent to car thieves. By combining this device with other security systems and staying vigilant, you can create an effective defense against modern, tech-savvy thieves.
A ghost immobiliser will protect your vehicle from hotwiring, key cloning and relay car theft by needing a pin code to start the engine. It uses buttons on your steering wheel and centre console, making it inaccessible to criminals.
Identifying the Wires
It is essential to secure your car since more and more vehicles are stolen without the owner's key. While thieves may be able to clone your key fob, or even take the car by hacking its system, a ghost immobiliser adds an additional layer of protection by blocking all signals coming from the key fob, making it impossible to start your car without entering a pin code.
You can install the ghost immobiliser yourself, but it is recommended to hire a professional to do the job. A professional technician will know where to install the unit and how to connect it to your vehicle's wiring. Installation can be complex, and it's important that the connections are made correctly to avoid damage or malfunctions.
To get the most effective results, you should be in a well-lit space and wear appropriate safety gear. It is also recommended to go through the user's guide to get familiar with the wiring system. This will allow you to identify the wires required to install the wiring and ensure that you have the proper equipment and components.
Once the wiring has been connected, you can reconnect your battery and determine if the system is working properly. You should also make sure that the battery's connections are secure to avoid electrical issues. You should also label the CAN L and CAN H wires with labels or tape to be capable of keeping track of them during the installation process.
The Ghost Immobiliser allows you to put your vehicle in Transport Mode if you want someone other than you to drive it temporarily such as for valet parking, or when the vehicle needs to be maintained. This allows you to input the code through a service button located on the steering wheel, the centre console, or door panels, and then it will enter PIN mode to change the code.
Some thieves try to bypass ghost immobilisers through jamming and spoofing devices that block or send fake messages to the system. This can be avoided by investing in the latest anti-jamming technology and regularly monitoring your Ghost Immobiliser for indications of tampering.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security gadget designed to stop car theft. It utilizes cutting-edge technology to detect the engine and then deactivate it when the correct PIN is entered. This prevents the vehicle from being stolen by thieves. The system is highly effective and stealthy. It has no visible indicators that could dissuade criminals. However, there might come a time when you need to remove the device to perform maintenance or upgrades, or even to sell your vehicle.
This procedure requires special tools and skills, since you will be working with wires and bypassing certain factory components. Additionally, it is crucial to follow the step-bystep instructions provided by the manufacturer of the ghost immobiliser. It is also recommended to consult a professional mechanic or auto electrician particularly if you don't have any prior experience working with cars.
It is crucial to examine the battery's condition after disconnecting the wires. Check that the battery is clean and free of corrosion and that all connections are secure. If necessary, think about replacing the battery to ensure it is able to withstand the demands of a security system that is aftermarket.
Once you have disconnected the wiring from the battery, you are now able to begin to take out the ghost immobiliser. Utilize strippers or wire cutters to carefully disconnect the wires, making sure not to damage the wires or their terminals. Label each wire so that it is easier to reconnect them in the future. If the wires are soldered together using a heat-resistant tool to break the connection. To avoid short-circuiting, is crucial to wrap the wires with insulation tape or heat shrink tubing.
Reconnect the wires to the 12V constant power source. Use a fuse tap if necessary to secure the connections using a fuse. Finally, connect the grounding wire to a grounded point on the chassis of the vehicle.
After reconnecting the wires, turn on your vehicle and enter the PIN code. Then, start the engine. If it fails to start then the ghost immobiliser has been removed successfully.
Making the Connections
A ghost immobiliser can be an affordable solution to improve the safety and security in your vehicle. It is connected to your vehicle's CAN bus system, intercepting signals and preventing the engine from running until the correct PIN code is entered. This system is nearly impossible to disable and is a great choice for motorists who want more security and peace of mind. In combination with a Thatcham Approved tracking system, it can also help to lower your insurance premium.
The process of obtaining and reviewing the wiring diagram for your car model is essential to the installation process. The diagram will act as a guideline for finding the wires needed to create precise connections. The connection will be durable and secure if you choose the appropriate wiring connectors and the proper soldering technique.
The wires that connect the Ghost immobiliser to the CAN bus system must be identified and connected correctly. It is recommended to use small pieces of tape or labels to mark the CAN H and L wires, since this will prevent confusion during the installation process. The locations of these wires will be different on every vehicle, so it is crucial to check the wiring diagram of your vehicle and online resources to identify them.
Once the correct cables are connected, power can be restored to the Ghost immobiliser. It is a great idea to test the immobiliser. Start the engine without entering the code. This will verify that the immobiliser is installed correctly and functioning exactly as it was intended to. It is recommended to test your immobiliser frequently to help to identify any issues or issues early.
The ghost immobiliser is able to be installed quickly and without modifying your vehicle's wiring. It's also a great choice for those who wish to enhance the security of their vehicles as it can be used together with a Thatcham-approved alarm or tracker that will notify your tablet or phone whenever the vehicle is damaged.
Mounting the Unit
The Ghost immobiliser is an excellent deterrent to car thieves, particularly when used in conjunction with the GPS tracking system. It uses buttons on the centre console, door panels and the steering wheel to create a unique sequence that only you can recognize to stop your car from getting started. The unit is also weatherproof and tamper-proof. It comes with a 3-year warranty and is endorsed by a number of insurance companies.
When installing the system it is essential to follow the steps carefully. While auto ghost immobiliser are able to handle the task by themselves, it's recommended to consult a professional if you are uncertain. Wire strippers and multimeters are vital tools to determine the wiring and make precise connections. It's also recommended to buy some insulation and electrical tape for protecting the connections from potential damage. It's a great idea to test your device after installation is complete to be sure that it functions as intended.
A Ghost immobiliser is a fantastic way to protect your vehicle from theft particularly in areas of high crime. It wards off key cloning ECU swapping, and other security threats. It can be used in conjunction with an iPhone app for easy management and monitoring. It's popular among car owners who want to secure their investment.
The Ghost II immobiliser features a sleek design and low-profile which makes it invisible to thieves. It is connected to your vehicle's CAN (Controller Area Network) and blocks you from starting the engine without entering a pin code. The PIN code is generated using a unique sequence of keys on the steering wheel, centre console or doors and can be changed at anytime. The device is also tamperproof and has an GPS tracker that can help police find your car in the event of a theft. It's a great option to safeguard your car from thieves and is Thatcham certified.