How to Install a Ghost Immobiliser
A ghost immobiliser guards your vehicle from key cloning or hacking. It prevents the engine from starting until a PIN number is entered. It can be as long as 20 characters.
It is unnoticeable by thieves and they are unlikely to expect this extra layer of security. Certain systems have an app which allows the owner to disarm their immobiliser if they forget their PIN code or to use the service/valet mode.
Connecting the vehicle's CAN Bus
The Ghost 2 Immobiliser is an advanced security system that can be incorporated into your vehicle's ECU, providing a discreet security line against thieves. It is extremely efficient and user-friendly. This makes it a valuable addition to your vehicle's arsenal of security. However, like any anti-theft device, it is not 100% reliable and requires regular maintenance to ensure proper operation. Fortunately, this guide will aid you in getting the most out of the Ghost 2 Immobiliser.
CAN (Controller Area Network) is a reliable serial network that allows microcontrollers to communicate with one another in short distances, without the necessity of a central control unit. It is designed for multiplexing electrical wiring inside vehicles to save on copper and offers a range of advantages, including low cost and a simple use.
The CAN protocol is utilized in a majority of modern automobiles to connect with the engine management system, steering control module and air conditioning controls and many more. It also carries sensor information like speed sensors, as well as other inputs, to control the vehicle's various features. The CAN bus is used to monitor these various components, and it can stop the vehicle from starting if they're in danger of failure.
Although the CAN bus can be used for a variety of purposes, it's important to understand how it works and how it's secured. It is possible to add new features to vehicles using CAN bus, but it's important to secure it against attacks from hackers and other dangers. Installing a firewall, and monitoring your CAN-bus with software is the best way to achieve this.
Ghost2's secluded control unit is hidden inside the car's wiring harness or dashboard, eliminating the possibility of a burglar physically altering it. It is also impossible to reset the PIN or emergency code without access to the vehicle.
You can activate Transport Mode if you need to give your vehicle away for valet parking, service or for any other reason. This feature will disable both the keyfob and the ignition functions of the Ghost immobiliser. It will only reactivate after the vehicle has travelled 31 mph for a time of 15 minutes.
How do you create a PIN code
The Ghost immobiliser is an effective security system that protects your vehicle from theft. The patented technology makes use of an PIN to disable the vehicle's engine and prevent it from starting if you don't have the correct code, or a valid fob/mobile. Its discrete design ensures the system is not noticed and offers unbeatable security against theft. Furthermore the system is TASSA tested and could provide significant savings on insurance premiums for cars.
During installation, the Ghost system goes into an learning mode that records the sequence of buttons pressed to create your unique pin code. The installer will guide you through activating the system once the pin code has been created. Once activated, the Ghost system will turn off the starter motor of your vehicle until a valid pin code is entered or the vehicle is switched into transport mode. This makes it very difficult for thieves to copy or hack into your vehicle's start system.
It is easy to install a Ghost immobiliser, however, you must follow the specific instructions in the user guide to ensure proper performance. Hand tools are essential in making precise connections and a multimeter can assist in determining the electrical value. Insulation tape and heat shrink tubing are a great way to protect the exposed wiring Cable tie is essential to keep everything neat and secure. Also, make sure to test the system regularly to identify any potential issues and errors.
It is important to test the system one more time before turning on the ignition. The Ghost immobiliser will arm itself after a period of 3-30 seconds, based on the vehicle model. It also has an option for Service/Valet that allows you to temporarily disable the system while you are servicing your vehicle or valet parking.
Ideally, the immobiliser should be placed in a hidden location beneath the steering wheel or dashboard. Use a small amount of duct tape or paint over the wires CAN H and L to make them easier to locate during testing. In addition the CAN H and CAN L wires must be connected to a power source that has continuous 12V. It is crucial to verify the connections again after testing because an the incorrect identification of these wires could cause the system to malfunction.
Activating the system
A ghost immobiliser stops your car from starting unless you press a set of buttons inside the car, usually the steering wheel, door panel, or central console. The sequence is determined by the user and is able to be changed if necessary. Once activated, the system can't be deactivated. This makes it a great choice for those who want to safeguard their vehicle against theft.
The system is designed to be undetectable. This means it can't be detected by modern diagnostic tools or code-grabbing technology. It doesn't emit radio frequencies making it even more difficult for thieves to identify.
If the device is detected, it will prevent the engine from running and sound an alarm with a loud sound to scare off thieves. The device can be used to track a car's location and assist in the recovery of the vehicle in case it was stolen.
If you are interested in a ghost-immobiliser get in touch with the experts at Car Specalist Customs to get an estimate and discuss your options. We are qualified to install ghost immobilisers in your vehicle. We will make sure that it is placed in an area that is difficult to access. We can also provide additional security measures like an ignition lock for your wheel and a kill switch to keep your car safe from thieves.
Disarming the system
If you own a Ghost immobiliser installed to your vehicle, it's important to know how you can disable it. This will help you in the event that you lock your keys inside the car or if your battery goes out of. The system uses a unique PIN code that only you know, and the immobiliser will not be able to start your car without entering this code. The most efficient method of entering the code is to press a combination of buttons on your dashboard or steering wheel. This is much simpler than using a key fob and prevents others from copying the remote.
Contrary to other aftermarket immobilisers which require cutting wires to install, Ghost2 is non-invasive and works with your vehicle's CAN bus network to operate. Its main characteristic is its ability to bypass the engine without affecting the normal functions, making it hard for thieves to use signal boosters or copy your car keys. It does not emit radio frequency, so thieves are unable to detect it.
The Ghost system comes with an option called Transport Mode that allows you to temporarily disable security for certain situations like transportation or service. This feature is an excellent option if you need to lend your vehicle to someone else without sharing the PIN number or in case you wish to secure your vehicle while driving it. To activate cost of ghost immobiliser press the service button 5 times within 2 seconds. The Ghost system will confirm activation with 5 indication signals.
After you're done, make sure to save the emergency code in a safe place outside of your vehicle. If you ever get locked out of your car you can contact the technician or company who installed the system, and they'll give you the code. If you are unable to contact them, you can seek out an authorized dealer. However, this might require verification procedures and you could be charged additional fees.
In addition to the convenience of this system, you can also rely on it to protect your car against theft and cut down on insurance costs. Many insurance companies offer lower rates or financial incentives to install this anti-theft system.